Body Measurement Technology and Utilisation: Implications for Africa
##article.abstract##
Anthropometry is fundamental in medicine, ergonomics, clothing, nutrition, fitness and health among other areas. Although utilised worldwide for clothing purposes, body measurement was based on manual and more recently, digital methods mainly in selected countries especially in the West. Current trends focus on new technology including state-of-the-art body scanning and subsequent utilisation and integration of such data in medicine, ergonomics, clothing design, health and fitness. Major national surveys continue to be conducted worldwide, but these are proprietary especially because of the cost implications and funding arrangements. While some measurement of African populations has been conducted, documentation and dissemination of such data is limited, thereby creating an apparent gap in knowledge and its application. The purpose of this paper is to contextualise body measurement in clothing technology and the utilisation of such data in Africa; and to present views from clothing technology perspectives that were collected from specialists and final year university students. Using an interview schedule, data were collected and analysed. Areas for focus were knowledge, educational programmes, usability, availability, new technology and its up-take, research and utilisation in industry. Findings reveal the urgent need for current comprehensive anthropometric data regarding African populations such as the Kenyan one. Poor resources and relevant knowledge, technology cost, poor up-take are reasons for lack of utilisation. To leverage funding, collaboration between governments, educational and research institutions on the one hand and related industry on the other is recommended. Integration of new digital and scanning technologies in body measurement could enhance global competitiveness; with validity and usability of such data across the different disciplines. The importance, context and implications of body measurement technology in clothing in Kenya and Africa are discussed
References
Apeagyei, P.R., Otieno, R. & Tyler, D. (2007). Ethical practice and methodological considerations in researching body cathexis for fashion products. JFMM, 11(3), 322-348.
Ashdown, S.P., Loker, S. & Adelson, C. (2004). Use of body scan data to discern sizing systems based on target markets. Retrieved (May 2013) from http:cornell.edu.units/txa/research/nts/s01-03.pdf.
ASTM (1999). Standard terminology relating to body dimensions for apparel sizing, Vol.07-02, Designation: D5219-99. American Standards for Testing & materials, West Conshohocken, PA.
Bougourd, J.P & Trelevean, P.C. (2002). Capturing the shape of a nation: size UK. Proceedings of the International Federation of the Fashion Institute (IFFTI) Conference, Hong Kong, 7-9 November.
Bye, E., Labat, K. & Delong, M. (2006). Analysis of body measurement systems for apparel. Clothing & Textiles Research Journal, 24 (2), 66-79.
Cheruiyot, M. (2013). Assessment of size and fit of ready-made formal clothing among male consumers: A case of Kenyatta University. Unpublished Master of Science thesis, Kenyatta University.
Daly, J., Tsomondo, E. & Jones, J. (1973). Height, weight and skinfold thicknesses of African school children. Central African Journal of Medicine, 19, 232-236.
Dob, V. (1994). Madchen-GroBentabellen Deutchland 1994. Representative Reihenmessurgen 1993 an 10,000 Frauen und Mudchen.
Doshi, G. (2006). Size and fit problems with ready-made garments. Retrieved May 10, 2013 from http//www.enzine articles.
Fiore, A.M., Lee, S. & Kunz, G. (2004). Individual differences, motivations and willingness to use mass customisation options for fashion products. European Journal of Marketing, 38(7), 835-849.
Garrow, J.S. & James, W.P. (1993). Anthropometric characteristics of urban adult subjects in Blantyre city, Malawi. Human Nutrition & dietetics, pp. 782.
Gordon, C.C. & Brandtmiller, B. (1992). Inter-observer error in large-scale anthropometric survey. American Journal of human Biology, 4, 253-63.
Hardaker, C.H.M & Fozzard, G.J.W. (1998). Towards the virtual garment: three-dimensional computer environments for garment design. International Journal of Clothing Science & Technology, 10 (2), 114-127.
ISO 3635 (1981). Size designation of clothes. Definitions and body measurement procedure, Reference No. 8559-1989. International Organisation for Standardisation, Geneva.
Istook, C. & Hwang, S. (2001). 3D body scanning systems with application to the apparel industry. Journal of Fashion Marketing & Management, 5 (2), 120-132.
KEBS (2002). Specification for size designation for men & boys‟ clothing. Nairobi, Kenya: Bureau of Statistics.
Kemsley, W. F.F. (1957). Women‟s measurements and sizes. HMSO, London.
Kroemer, K. H., Kroemer, H. J. & Kroemer-Elbert, K.E. (1986). Engineering physiology: Physiological Bases of human factors. Ergonomics, Elsevier, Amsterdam.
Loker, S., Ashdown, S. & Schoenfelder, K. (2005). Size-specific analysis of body scan data to improve apparel fit. Journal of Textiles & Apparel technology & Management, 4 (3), 1-115.
Mason, A. M. (1998). Constraints affecting the growth of „Jua Kali‟ clothing manufacturers in Nairobi, Kenya. MSc thesis, the Manchester Metropolitan University.
Mastamet-Mason, A. (2008). An explication of the problems with fit experienced by female Kenyan consumers in terms of their unique body shape characteristics. Unpublished PhD thesis, University of Pretoria.
Msamati, B.C. & Igbigbi, P.S. (2000). Anthropometric profile of adult black Malawians. East African Medical Journal, 77 (7), 364-368.
O‘Brien, R. & Sheldon, W.C. (1941). Women‟s measurements for garment and pattern construction. Washington, DC: Government Printing Office.
Otieno, R. (1999). The development of body measurement charts for 3 to 6 years old nursery school children in Nairobi Province: Implications for marketing strategy. A doctoral dissertation, The Manchester Metropolitan University.
Otieno, R. (2008). Approaches in researching human measurement: MMU model of utilising anthropometric data to create size charts. EuroMed Journal of Business, 3(1), 63-69.
Otieno, R. (2010). 3D body scanning technology: Opportunities for the African context .
World Gift & Talent Conference, 24-26th March, Nairobi Kenya.
Otieno, R., Harrow, C. & Lea-Greenwood, G. (2005). The unhappy shopper, a retail experience: exploring fashion, fit and affordability. International Journal of Retail and Distribution Management, 33(4), 298-309.
Pisut, G. & Connell, J. (2007). Fit preferences of female consumers in the USA. Journal of Fashion Marketing & Management, 11(3)
Shin, S.H. & Istook, C.L. (2007). The importance of understanding the shape of diverse ethnic female consumers for developing jeans sizing systems. International Journal of Consumer Studies, 31, 135-143.
Simmons, K. & Istook, C. (2003). Body measurement techniques: Comparing 3D body scanning and anthropometric methods for apparel applications. Journal of Fashion Marketing & Management, 7(3), 306-332.
Steyn, K., Bourne, L., Jooste, P., Fourie, J.M., Rossouw, K. & Lombard, C. (1998). Anthropometric profile of black population of the Cape Peninsula in South Africa. East African Medical Journal, 75, 35-40.
Zinyowera, T.S., Msamati, B.C. & Banadda, B.M. (1994). Obesity- is it a problem in Black Zimbambweans? Central Africa Journal of Medicine, 40, 33-38.
Zwane, P.E. & Magagula, N. (2006). Pattern design for women with a disproportionate figure: A case study for Swaziland. International Journal of Consumer Studies, 31, 283-287.
